Tiny Chips Windshield on Hyundai! Causes and How to Solve It

Your car’s windshield encounters various impacts, scratches, and incidents that may result in damage causing tiny chips windshield.

A small crack or chip can occur due to flying stones, gravel, or accidental impacts.

Timely attention is crucial to prevent these minor issues from escalating into widespread spider cracks on your windshield.

You can find effective solutions for fixing a cracked windshield and find trustworthy DIY repair kits.

An Image showing a Chip on Windshield
Tiny Chips Windshield Photo Courtesy Miracleagc

Causes of Tiny Chips on Your Windshield

Road Debris

Road debris like rocks, stones, pebbles, and gravel can be thrown up by other vehicles or fall off the back of a lorry. These small, hard objects can hit your windscreen at high speeds, leading to chips or cracks.

While you can’t always dodge a random stone, maintaining a safe distance from the vehicle in front of you can lower the risk.

Remember to reduce your speed when someone is overtaking, exercise caution on gravel, and be alert in construction zones. Keep an eye out for “Loose Chippings” signs.

Adverse Weather Conditions

Unpredictable weather is another common culprit for windscreen damage. High winds can blow tree branches and debris onto your windscreen, causing similar damage to that caused by stones. Heavy hailstones can also pose a threat.

If you have access to a garage or covered parking space, consider using it during stormy weather to protect your vehicle from potential damage.

Sudden Temperature Changes

Be aware of the impact of sudden temperature changes on your windscreen. Rapid contraction or expansion of the glass can occur, often due to human error.

Small windshield chips, often called nicks, are the most frequent type of damage that can be easily fixed using an epoxy repair kit.

If the chip is smaller than a quarter and the crack is shorter than 3 inches, you can use an epoxy repair kit for a quick fix.

However, if the chip exceeds a quarter in size or the crack is longer than three inches, you may need a professional product or a complete windshield replacement.

Bullseye, caused by the impact of rocks with significant force, is the most common chip type. It’s one of the simplest glass repairs and leaves minimal traces once fixed.

Determining the Size of the Chip or Crack

Before diving into the repair process, it’s crucial to assess the size of the crack on your windshield. If the damage is smaller than a quarter and the crack is less than 3 inches, you can opt for an epoxy repair kit.

However, larger cracks may require professional assistance or a complete windshield replacement. Please make sure your chosen kit covers the size of the damage on your vehicle before proceeding.

Choosing the Right Repair Kit

Selecting the right repair kit is essential for a successful fix. Compare different kits based on factors such as cost, acceptable crack or chip size, expiration date, and curing steps.

Keep in mind that epoxy has an expiration date, so choose a kit that is young enough for proper adhesion. Additionally, check for any specific instructions or additional tools required for your chosen kit.

How to Fix the Windshield Chip

1. Clean the Area

Start the repair process by thoroughly cleaning the damaged area. Use a microfiber towel and a small amount of rubbing alcohol to wipe away any dirt or debris. Ensure the area is completely dry before applying the patch to avoid compromising the repair.

2. Apply the Patch and Pedestal

Remove the paper backing from the patch and align it with the damaged area on your windshield. Center the patch and place it on the exterior, using the included pedestal for epoxy application.

Could you confirm that the crack or chip is not larger than the cutout on the patch?

3. Use the Included Epoxy Resin

Depending on the kit, either mix the epoxy resin or use pre-mixed resin. Fill the pedestal with liquid resin and use the syringe to compress it down.

Please keep an eye on the syringe position to make sure it’s pulling out completely. This step creates a vacuum to encourage air bubbles to escape from the cracked area.

4. Wait for the Air Bubbles to Escape

Be patient and watch for air bubbles to escape, following the time in the kit’s instructions. This can take anywhere from 1 to 10 minutes. Please don’t remove the syringe until no more air bubbles are forming, as this is a crucial step in ensuring a successful repair.

5. Remove the Syringe and Pedestal

After the air bubbles have escaped, push the syringe plunger down to force the remaining resin into the crack. Carefully remove the syringe, patch, and pedestal after the epoxy has cured.

Consider applying an additional drop on the top of the crack if needed to achieve a flawless finish.

6. Use the Curing Strip

Most repair kits include a curing strip for the final layer. Carefully place the strip on the crack, avoiding air bubbles. Please allow it to rest for the time that is recommended before gently scraping it off with a razor blade for a clean finish.

7. Remove Excess Epoxy

Finally, scrape off any remaining resin using a razor blade. Exercise caution to avoid fingerprints or damage to your windshield. With careful attention to detail, you should be left with a flawlessly repaired windshield

Read More!

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x