How to Use Hyundai Park Assist; A Complete Guide

Hyundai park assist is a feature that helps you park your car in tight spaces with ease.

It uses ultrasonic sensors to detect obstacles in front of or behind your car, and alerts you with beeps or visual indicators.

How to Use Hyundai Park Assist
How to Use Hyundai Park Assist | Autotrader

Some Hyundai models also have Remote Smart Parking Assist (RSPA), which allows you to move your car in or out of a parking spot remotely using your smart key.

In this article, we will explain how to use both features and what to keep in mind when using them.

READ ALSO : What Oil Does a Hyundai 2017 Elantra Take?

How to Use Hyundai Front Park Assist

Hyundai front park assist is a system of ultrasonic sensors embedded into your front bumper that will sound an alert in your cabin if any physical obstructions are detected in front of you.

The system activates itself when you’re travelling at low speeds, such as when parking. Here are the steps to use Hyundai front park assist:

1. Start your car and put it in drive mode.
2. Approach the parking spot slowly and watch the front park assist indicator on the instrument cluster. The indicator will show green, yellow, or red zones depending on the distance to the obstacle. The closer you get to the obstacle, the more frequent the beeps will become.
3. When the indicator shows a red zone and the beeps become continuous, stop your car and put it in park mode. You have reached the minimum safe distance to the obstacle.
4. If you need to adjust your position, you can switch to reverse mode and use the rear park assist indicator and beeps to guide you. Then, switch back to drive mode and repeat the steps above.

How to Use Hyundai Rear Park Assist

Hyundai rear park assist is similar to front park assist, but it uses sensors on the rear bumper to detect obstacles behind your car.

The system also activates itself when you’re travelling at low speeds, such as when parking or reversing.

Here are the steps to use Hyundai rear park assist:

1. Start your car and put it in reverse mode.
2. Move your car backward slowly and watch the rear park assist indicator on the instrument cluster. The indicator will show green, yellow, or red zones depending on the distance to the obstacle. The closer you get to the obstacle, the more frequent the beeps will become.
3. When the indicator shows a red zone and the beeps become continuous, stop your car and put it in park mode. You have reached the minimum safe distance to the obstacle.
4. If you need to adjust your position, you can switch to drive mode and use the front park assist indicator and beeps to guide you. Then, switch back to reverse mode and repeat the steps above.

How to Use Hyundai Remote Smart Parking Assist

Hyundai Remote Smart Parking Assist (RSPA) is a feature that allows you to move your car in or out of a parking spot remotely using your smart key .

The system uses cameras and sensors to control the steering, acceleration, braking, and gear shifting of your car.

You can use RSPA when your car is parked in a tight spot or when you want to avoid getting in or out of your car in bad weather.

Here are the steps to use Hyundai RSPA:

1. Make sure your car is equipped with RSPA and your smart key has a remote parking button. The button has a symbol of a car with arrows pointing forward and backward.
2. Park your car in a spot that has enough space for your car to move forward or backward. Turn off the engine and get out of your car. Lock the doors with your smart key.
3. Stand within 4 meters of your car and point your smart key at it. Press and hold the remote parking button. Your car will start and move in the direction of the arrow on the button.
4. Release the button when your car reaches the desired position. Your car will stop and turn off the engine. You can also press the lock or unlock button on your smart key to stop the car at any time.
5. To move your car back to the original position, press and hold the remote parking button in the opposite direction. Release the button when your car reaches the desired position. Your car will stop and turn off the engine.
6. Unlock the doors with your smart key and get in your car. You can now drive normally.

Tips and Warnings for Using Hyundai Park Assist

Hyundai park assist is a helpful feature that can make parking easier and safer, but it is not a substitute for your attention and judgment.

You should always check your surroundings and follow the traffic rules when parking your car.

Here are some tips and warnings for using Hyundai park assist:

1.Hyundai park assist only works when you are driving at low speeds (below 15 km/h for front park assist and below 10 km/h for rear park assist).

If you exceed the speed limit, the system will deactivate and stop alerting you.

2.Hyundai park assist may not detect some objects that are too small, too thin, too low, too high, or too far from your car.

It may also not detect objects that are moving, such as pedestrians, animals, or other vehicles.

You should always look out for these objects and avoid hitting them.

3.Hyundai park assist may not work properly in some weather or road conditions, such as rain, snow, fog, mud, sand, or ice.

It may also not work properly if the sensors are dirty, damaged, or covered by stickers or accessories.

You should always keep the sensors clean and clear of any obstructions.

4.Hyundai RSPA only works when your smart key is within 4 meters of your car and has a clear line of sight to it.

If you move too far away from your car or lose sight of it, the system will stop and your car will stop moving.

You should always stay close to your car and watch it when using RSPA.

5.Hyundai RSPA may not work properly if there are obstacles or interference in the way, such as walls, fences, poles, trees, or other vehicles.

It may also not work properly if the signal from your smart key is weak or blocked by metal objects, such as keys, coins, or phones.

Conclusion

Hyundai park assist is a feature that makes parking easier and safer for drivers. It uses sensors and cameras to detect obstacles and alert drivers with beeps or indicators.

Some Hyundai models also have RSPA, which allows drivers to move their car remotely using their smart key.

However, Hyundai park assist is not a substitute for driver’s attention and judgment.

Drivers should always check their surroundings and follow the traffic rules when parking their car.

They should also keep the sensors clean and clear of any obstructions or interference.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x