How To Unlock Hyundai Steering Wheel? 3 Easy Methods

A steering wheel lock is a safety feature that prevents the vehicle from moving when the key is not in the ignition.

However, sometimes the steering wheel may get locked accidentally or due to a mechanical problem, making it difficult to start the car.

a car beeping while driven
Hyundai steering wheel | J.D. POWER


In this article, we will explain how to unlock a Hyundai steering wheel using some simple steps.

 Method 1: Turn the Key and the Wheel Simultaneously

The most common way to unlock a Hyundai steering wheel is to turn the key and the wheel at the same time.

This method works for most models of Hyundai cars, such as i30, Getz, Elantra, and Sonata.

Here are the steps to follow:

1.Insert the key into the ignition and try to turn it. If the key does not turn, do not force it or you may damage the key or the ignition cylinder.
2.Determine which direction the steering wheel is locked. You can do this by gently turning the wheel left and right.

The wheel will have some play in one direction, but will be completely stuck in the other direction. The direction that is stuck is where the locking pin is located.

3.Apply steady pressure to the key in the direction that you would normally turn it to start the car.

Do not use too much force or you may break the key.

4.While applying pressure to the key, turn the steering wheel in the opposite direction of the locking pin.

For example, if the wheel is locked to the left, turn it to the right.

You may need to wiggle the wheel back and forth slightly until you feel a click.

5.Once you hear a click, the steering wheel should be unlocked and you should be able to turn the key and start the car.

Method 2: Spray Lubricant into the Ignition Cylinder

If method 1 does not work, you may have a sticky or dirty ignition cylinder that prevents the key from turning.

In this case, you can try spraying some lubricant into the keyhole to loosen up any debris or corrosion. Here are the steps to follow:

1.Find a suitable lubricant for your ignition cylinder. You can use WD-40, graphite powder, or silicone spray. Do not use oil or grease as they may attract more dirt and cause more problems.

2.Spray a small amount of lubricant into the keyhole. Do not overdo it or you may damage the electrical components inside.

3.Insert and remove the key several times to distribute the lubricant inside the cylinder.

4.Try method 1 again and see if you can unlock the steering wheel.

 Method 3: Replace the Ignition Cylinder

If none of the above methods work, you may have a faulty or worn-out ignition cylinder that needs to be replaced.

This is a more complicated and expensive procedure that requires professional assistance.

You should contact your Hyundai dealer or a trusted mechanic to have your ignition cylinder replaced.

Here are some signs that indicate that your ignition cylinder is faulty:

1.The key does not turn at all or turns very hard
2.The key gets stuck in the ignition or comes out easily
3.The steering wheel does not lock or unlock properly
4.The car does not start or stalls frequently

Replacing an ignition cylinder may cost between $200 and $500 depending on your car model and labor fees.

You may also need to reprogram your key fob or get a new one if your old one does not work with the new cylinder.


A steering wheel lock is a useful feature that prevents theft and unauthorized use of your car.

However, sometimes it can cause inconvenience or frustration when it gets locked unintentionally or due to a mechanical issue.

In this article, we have shown you how to unlock a Hyundai steering wheel using three methods: turning the key and the wheel simultaneously, spraying lubricant into the ignition cylinder, and replacing the ignition cylinder.

We hope that these methods help you solve your problem and get back on the road safely.



0 0 votes
Article Rating
Notify of
Inline Feedbacks
View all comments
Would love your thoughts, please comment.x