How to Change Windshield Wipers on a Hyundai Elantra 2020?

Windshield wipers are essential for maintaining good visibility and safety while driving, especially in rainy or snowy conditions.

However, over time, wiper blades can wear out and become less effective, leaving streaks, smears, or noises on the windshield.

Therefore, it is recommended to replace the wiper blades at least once a year or whenever they show signs of damage or deterioration.

Hyundai Elantra wiper blades
Hyundai Elantra wiper blades | IFIXIT

Changing the windshield wipers on a Hyundai Elantra 2020 is not a difficult task, and you can do it yourself with some basic tools and a new set of wiper blades.

Here are the steps to follow:

READ ALSO : How to Change Windshield Wipers on a Hyundai Elantra 2020

Step 1: Determine the size and type of the wiper blades

Before you buy new wiper blades, you need to know the size and type of the wiper blades that fit your Hyundai Elantra 2020.

According to the owner’s manual, the front wiper blades are 28 inches for the driver’s side and 14 inches for the passenger’s side.

The rear wiper blade is 13 inches.

You also need to choose the type of wiper blade that suits your preference and budget.

There are different types of wiper blades available in the market, such as conventional, beam, hybrid, or silicone.

Each type has its own advantages and disadvantages in terms of performance, durability, and price.

You can compare the features and reviews of different wiper blades online or ask for recommendations from your local auto parts store.

Step 2: Remove the old wiper blade assembly

Once you have the new wiper blades ready, you can proceed to remove the old ones from your Hyundai Elantra 2020.

To do this, you need to:

1.Turn off your vehicle and make sure the ignition is in the OFF position.
2.Lift up the wiper arm away from the windshield until it locks in a vertical position.
3.Locate the clip that holds the wiper blade assembly to the wiper arm. You may need to use a Phillips head screwdriver to release the clip.
4.Slide the wiper blade assembly horizontally along the wiper arm until it detaches from the hook at the end of the arm.
5.Dispose of the old wiper blade assembly properly.

Step 3: Attach the new wiper blade assembly

After removing the old wiper blade assembly, you can install the new one by following these steps:

1.Align the new wiper blade assembly with the hook at the end of the wiper arm.

2.Slide the wiper blade assembly horizontally along the wiper arm until it clicks into place on the clip.
3.Make sure that the wiper blade assembly is securely attached and that there is no gap between the rubber blade and the windshield.

4.Lower the wiper arm back to its original position on the windshield.

Step 4: Test the new wiper blades

The final step is to test the new wiper blades and make sure they work properly. To do this, you need to:

1.Turn on your vehicle and activate the windshield washer fluid by pulling the lever on the steering column towards you.
2.Observe how the new wiper blades clean the windshield and check for any issues such as streaks, smears, noises, or vibrations.
3.If everything looks good, you are done with changing your windshield wipers. If not, you may need to adjust or replace the new wiper blades.

How often should I change my wiper blades?

According to the web search results, the general rule of thumb is to replace your wiper blades every six to 12 months.

However, this may vary depending on the weather conditions and the type of wiper blades you use.

Some factors that can affect the lifespan of your wiper blades are:

1.Exposure to sunlight, heat, and cold

2.Frequency and intensity of use
3.Quality and material of the wiper blades
4.Road debris, dust, and salt

You should inspect your wiper blades regularly and look for signs of wear and tear, such as cracks, splits, streaks, smears, noises, or vibrations.

If you notice any of these symptoms, you should replace your wiper blades as soon as possible to ensure good visibility and safety while driving.

Conclusion

Changing windshield wipers on a Hyundai Elantra 2020 is a simple and inexpensive way to improve your driving safety and comfort.

By following these steps, you can replace your old or worn-out wiper blades with new ones in less than 15 minutes.

However, if you encounter any difficulties or have any questions, you can always consult your Hyundai dealer or a professional mechanic for assistance.

 

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x