2021 Hyundai Elantra Backup Camera not Working

Are you worried about issues with your 2021 Hyundai Elantra Backup Camera not Working? Unsure how to tackle and resolve them?

There are various problems that can arise with your backup camera, such as no signal, a black screen, or blurry images.

If you encounter these issues, you can try some troubleshooting on your own to see if you can fix them.

However, if the problem seems too difficult to handle alone, it might be best to seek help from a professional. Knowing your limits is key.

Fortunately, many troubleshooting steps for backup cameras aren’t overly complicated. With a little time and effort, you should be able to identify and potentially resolve the issue yourself.

An Image Showing 2021 Hyundai Elantra
2021 Hyundai Elantra Image Courtesy: Orilliahyundai

1. If your backup camera isn’t showing any signal, there might be an issue with your fuses.

Before giving up and thinking about buying a new camera, it’s worth investigating what might be causing this problem and how to fix it.

Firstly, think about the type of backup camera you have. If it’s a wi-fi-based camera and was previously working fine, a simple reset might do the trick. This is a common fix for wi-fi cameras.

If that doesn’t work, check the fuse. It’s possible that a fuse has blown or there are some damaged wires. You can usually find the camera’s fuse and cables behind your car’s trunk panel, so take a look there.

If it’s just frayed wires, replacing and reconnecting them usually solves the issue quickly.

Wired cameras are a bit simpler. Usually, the ‘no signal’ problem is due to poor wiring conditions. Double-check the wiring and fuse to ensure everything is connected properly and in good condition.

If the display is integrated into the dashboard, start by checking the camera before moving on to the display.

Removing the dashboard display should be a last resort since it’s more complicated and time-consuming than checking the camera initially.

One important thing to remember – always try a system reset before troubleshooting the wiring. Many times, a reset resolves the issue caused by a glitch.

2.Monochrome Camera Output

If your backup camera is showing a black and white display instead of its usual quality image, it could indicate a wiring problem.

Check for any loose connections or damaged wires, as these are often the reasons behind this issue. Repairing any damage and ensuring proper connections should resolve this issue.

An Image Showing 2021 Hyundai-Elantra Backup Camera
2021 Hyundai-Elantra Backup Camera Photo Courtesy: Reddit

3. The display Screen is completely black.

If your Hyundai Elantra backup camera shows a completely black screen, you’re not alone. This issue can be worrying, but it’s often fixable.

Most of the time, a black screen means the camera isn’t set up correctly. Try reinstalling it following the instructions in your manual.

It’s common for home installations to mistakenly plug the camera into the AUX dash cable instead of the video feed.

If your display isn’t turning on, it’s probably due to improper connection (ensure correct power supply) or a damaged monitor.

Also, some users set up their backup cameras to activate only in reverse. Make sure to test it by actually putting the car in reverse.

This simple step might solve the problem without needing to buy a new camera.

Fixing The 2021 Hyundai Elantra Backup Camera not Working Issue

Many modern vehicles come equipped with a handy backup camera, making reversing easier, especially for larger vehicles.

Sometimes, though, these cameras can act up. You might find your video feed isn’t loading on your rearview mirror or dashboard screen, or maybe you’re just seeing a black or brown screen instead of the camera view.

Don’t worry, you can often troubleshoot and fix these issues yourself.

Start by giving your backup camera a good clean with a soft cloth to remove any dirt or debris that might be blocking the lens.

Next, turn on your vehicle. When you shift into reverse, the backup camera feed should automatically appear on your screen. If it doesn’t, there might be an issue with the monitor or camera.

To narrow down the problem, consult your owner’s manual to locate the fuse box. If your camera or monitor isn’t working, it could be due to a blown fuse.

These are usually found under the steering wheel. Find the fuse corresponding to your camera setup and replace it with a new one, which you can pick up from any auto store.

Once you’ve replaced the fuse, turn on your vehicle again, and your backup camera should be back in action.

Read More!

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x